NJ39/630 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Shaft End Flow @ RPM:32.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Length:Right Hand (CW); GPM @ 1,800 rpm, Cover End:25VQ12A-11A20; Mounting:1 1/2; Shaft End Pressure [Max:Flange; Controlled Flow Rate:N/A; Port Orientation - Shaft End:20; Shaft Key:12 gpm @ 1200 rpm; Port Orientation - Cover End:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ3968 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Rotation:32.0 LB; Cover End RPM [Max:Flange Mount; Port Type:Right Hand (CW); Manufacturer Part No.:25VQ12A-11A20; Integral Valve Configuration:1 1/2; Shaft Key:Flange; Minor Diameter [Max:N/A; Pump Series:20; Max. RPM [Max:12 gpm @ 1200 rpm; Port Orientation - Shaft End:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ3952 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Cover End RPM [Max:32.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Key:Right Hand (CW); Model No.:25VQ12A-11A20; Pressure Port Size, Shaft End:1 1/2; Major Diameter [Min:Flange; Pilot Type:N/A; Cover End Pressure [Max:20; Port Orientation - Shaft End:12 gpm @ 1200 rpm; Shaft End RPM [Max:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ39/530 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Major Diameter [Max:32.0 LB; Pump Series:Flange Mount; Relief Valve Setting:Right Hand (CW); Weight:25VQ12A-11A20; Pressure Port Size, Shaft End:1 1/2; Cover End Pressure [Max:Flange; Port Size:N/A; Minor Diameter:20; Shaft Length:12 gpm @ 1200 rpm; Shaft End RPM [Max:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ39/500E american SINGLE ROW CYLINDRICAL ROLLER BEARING	Shaft End Flow @ RPM:32.0 LB; Spline Description:Flange Mount; Weight:Right Hand (CW); Minor Diameter [Min:25VQ12A-11A20; GPM @ 1,800 rpm, Cover End:1 1/2; Integral Valve Configuration:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft End RPM [Max:20; Model No.:12 gpm @ 1200 rpm; Major Diameter [Min:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ3964 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Weight:32.0 LB; Pilot Type:Flange Mount; Shaft Key:Right Hand (CW); Pump Series:25VQ12A-11A20; Minor Diameter [Max:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Model No.:N/A; Relief Valve Setting:20; Displacement Shaft End (cu in/revolution):12 gpm @ 1200 rpm; Shaft End Flow @ RPM:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ3960 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Shaft Type:32.0 LB; Shaft Dia.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:25VQ12A-11A20; Shaft Seal Type:1 1/2; Spline Description:Flange; Minor Diameter [Min:N/A; Port Orientation - Shaft End:20; GPM @ 1,800 rpm, Cover End:12 gpm @ 1200 rpm; Shaft Key:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ39/560 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Shaft Key:32.0 LB; Rotation:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Length:25VQ12A-11A20; Displacement Shaft End (cu in/revolution):1 1/2; Seal Material:Flange; Pump Series:N/A; Shaft End RPM [Max:20; Relief Valve Setting:12 gpm @ 1200 rpm; Shaft Dia.:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ3956 american SINGLE ROW CYLINDRICAL ROLLER BEARING	Spline Description:32.0 LB; Port Type:Flange Mount; Pilot Type:Right Hand (CW); Minor Diameter [Min:25VQ12A-11A20; Pump Series:1 1/2; Shaft Type:Flange; Max. RPM [Max:N/A; Shaft End Flow @ RPM:20; Port Size:12 gpm @ 1200 rpm; Pressure Port Size, Cover End:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;
NJ39/600 american SINGLE ROW CYLINDRICAL ROLLER BEARING	GPM @ 1,800 rpm, Shaft End:32.0 LB; Shaft End Pressure [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Min:25VQ12A-11A20; Controlled Flow Rate:1 1/2; Mounting:Flange; Port Orientation - Cover End:N/A; Shaft End Flow @ RPM:20; Pressure Port Size, Cover End:12 gpm @ 1200 rpm; Port Type:11; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:25VQ; Shaft Length:1 3/8 in; Mounting Code:None; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2700; Pressure [Max:3000 psi; GPM @ 1,800 rpm:18; Inlet Port Code:A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:25VQ12A-11A20; Displacement (in³/rev):2.45; Integral Valve Configuration:w/o Integral Valves;

Cylindrical Roller Bearings | Roller Bearings | Products | NSK

There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or

single row cylindrical roller bearings - ISB Industries

SINGLE ROW CYLINDRICAL ROLLER BEARINGS ISB. Enter now to have more information!

Single row cylindrical roller bearings

SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this

Cylindrical & Single Row Roller Bearings | AST Bearings

Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings

Single Row Cylindrical Roller Bearings - Electric Motor

Single row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used around the world

NJ334E american SINGLE ROW CYLINDRICAL ROLLER BEARING Video

Contact Us

FBV Hydraulic Pump Co., Ltd.: Address8201 South International Drive, Columbus, IN 47201,U.S.A.

Send Now

NJ334E american Technical Articles

Are hydraulic motors reversible?

US3811282A - Hydraulic control circuit for a reversibleThe pilot controlled valve means are responsive to a main control valve to selectively communicate the first and second pumps to the motor and to drain, thus Reversible (Bidirectional)...

Can a hydraulic pump be used as a motor?

Hydraulic pump in place of a hydraulic motor? | My TractorOct 13, 2011 — Some pumps can be used as uni-directional motors. To run a pump as a motor, connect the hydraulic source to the its pressure port. The suction What is the...

FBV Hydraulic Pump Co., Ltd.

NJ334E american MODELS

NJ334E american SINGLE ROW CYLINDRICAL ROLLER BEARING

NJ334E american SPECIFICATIONS

american

Product Details

NJ334E american Product Description