Yuken DSHG-10 pressure valve

Housing:SAF 028 KA; P60°:185 kN; P120°:72.5 kN; P180°:81.4 kN; Labyrinth ring:2 x LOR 123; Appropriate attachment bolt size G:0.75 in; Ca:72.619 mm; J min.:336.55 mm; Stabilizing ring:2 x 36053-50; Cap bolt:2 x 1-8 UNC;

A1:16 mm; Recommended tightening torque for set screw:16.8 Nm; C:35.1 kN; C0:23.2 kN; Weight:2.37 kg; A2:54.6 mm; s1:25.8 mm; e:22 mm; Designation of open end cover:SCOU210-30; J:157 mm;

B:66 mm; T min.:-40 °C; s1:33 mm; d:55.56 mm; N:23mm; L:185 mm; e:17 mm; A:52 mm; A2:58 mm; C:71.5 kN;

Self Aligning:Self Centering; Seal Type:Shield; Bearing Locking Device:Setscrew; UPC:782476370633; Flinger Type:Standard; Bearing Family:Setscrew Ball Bearin; Bearing Inner Ring Material:Steel; Anti-Rotation Pin:Yes; Grease Type:DuPont Krytox GPL 20; Expansion Type:Non-Expansion;

Pa:14.2 kN; P120°:20 kN; PG:1/8 NPT; N1:15.875 mm; Initial grease fill:136.08 g; L:285.75 mm; R2:21.431 mm; Labyrinth ring (db shaft position):LOR 79; Labyrinth ring (dc shaft position):LOR 46; P60°:54.3 kN;

Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.001 kg; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; D:10 mm; B:4 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; d:6 mm;

Da max:5.5 mm; Product Group:B00308; B:4 mm; Weight / Kilogram:0.001; Inch - Metric:Metric; d:5 mm; Bore:0.197 Inch | 5 Milli; Category:Single Row Ball Bear; Enclosure:2 Metal Shields; Category:Single Row Ball Bear;

S:12.7 mm; E:21 mm; d:12 mm; C:12.8 kN; A5:18.3 mm; Recommended tightening torque for set screw:5.5 Nm; G1:M16; B:31 mm; T min.:-40 °C; s1:15.5 mm;

T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; C0:23.2 kN; G:M6x1; A1:36 mm; A:55 mm; T max.:100 °C; H:55.6 mm; B:51.6 mm; J:164 mm;

Retainer Material:Nylon; End Cap Groove:Yes; Bearing Bore Shape:Round; Bearing Family:Setscrew Ball Bearin; Bearing Locking Device:Setscrew; Expansion Type:Non-Expansion; Max Bearing Speed:5500 rpm; Bearing Inner Ring Material:Steel; UPC:782475113903; Retainer Type:Std Retainer;

UPC:782476364441; Housing Material:Cast Iron; Grease Type:Unirex N2; Ring Size:Standard; Bearing Insert Material:Steel; Flinger Material:Steel; Flinger Type:Standard; Ball Bearing Housing Series:206 Series; Self Aligning:Extended Ring; Max Bearing Speed:5500 rpm;

Basic dynamic load rating C:83 kN; Reference speed:7500 r/min; Calculation factor Y:1.1; db min.:42.5 mm; Fatigue load limit Pu:10 kN; r1,2 min.:1 mm; d:34.925 mm; Da min.:57 mm; C:19.842 mm; da max.:42 mm;

D:125 mm; ra max.:1.5 mm; Basic dynamic load rating C:370 kN; Calculation factor Y0:1.6; rc max.:0.6 mm; Calculation factor Y1:1.7; Limiting speed:5000 r/min; Fatigue load limit Pu:60 kN; Calculation factor Y2:2.5; da max.:84 mm;

Nref:1,600 rpm; Characteristic cage frequency, FTF:0.43 Hz; D:300 mm; Mass:26.38 kg; Max operating temperature, Tmax:200 °C; da min:194 mm; Characteristic inner ring frequency, BPFI:11.9 Hz; rs min:3 mm; Number of lubrication holes:3; Min operating temperature, Tmin:-40 °C;

C:19.5 kN; s1:15 mm; A2:40 mm; Designation of housing:EHE206-; Weight:0.95 kg; L1:72 mm; E:24 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; L3:40 mm;